SPALL REPAIR PROCEDURES
The repair process begins after the final cleaning of the area. The area must be dry and free of dust, oil, dirt, etc. A good repair begins with a clean surface. Since the volume of most spall repa
What is Smog Eating Concrete Buildings? How it Can Save Our Cities from Pollution?
According to the World Health Organisation, eighty percent of the people living in the city are breathing polluted air. Air pollution levels are increasing faster than ever. Air pollution is one of
Slump Flow Test on Self Compacting Concrete for Workability
Slump Flow Test and T 50 cm Test on Self Compacting Concrete The slump flow test is used assess the horizontal free flow of self compacting concrete in the absence of obstructions. It was firs
Properties of Hardened Concrete with Blast Furnace Slag (GGBFS)
The physical properties of Ground Granulated blast furnace slag (GGBFS) provides advantages to the concrete in fresh state as well as in its hardened state.
Reinforced Concrete Slab Casting- Work Procedure
The construction joint shall be pre decided and fixed prior to start of the concreting. It is planned to have two construction joints for main building as decided. In case of major break down of th
Failed Concrete Slump Test? Here is What you Should do
Engineers should make a proper decision when an on-site slump test fails. The decision could be an outright rejection of the complete batch of concrete or the suspension of the work due to the cont
Closed-Cell Spray Foam Insulation: Evaluating the Performance Trade-Offs for Residential Construction
When builders and homeowners look for high-performance insulation, closed-cell spray polyurethane foam (SPF) often tops the list. It delivers a high R-value per inch, seals building cavities against air leakage, and acts as a vapor retarder. But these benefits come with real trade-offs in cost, environmental impact, installation complexity, and long-term building performance. Understanding both
Tyvek DrainVent: A Complete Guide to DuPont Drainable Rainscreen Membranes for High-Performance Wall Assemblies
Weather-resistant barriers have evolved significantly over the past decade, moving beyond simple felt paper and basic housewrap to sophisticated engineered systems that actively manage moisture behind cladding. Among the most notable advancements is DuPont introduction of the Tyvek DrainVent, a 1/4-inch thick drainable, ventilated rainscreen membrane designed to work in concert with a properly installed
Peel-and-Stick Drainable Housewrap: Self-Adhered Water-Resistive Barrier Installation Guide
Understanding Self-Adhered Drainable Housewrap Technology Peel-and-stick drainable housewrap represents a significant evolution in water-resistive barrier (WRB) technology for modern building envelopes. Unlike traditional mechanically fastened housewraps that rely on staples or cap nails and often sag or tear during installation, self-adhered versions such as Benjamin Obdyke’s HydroGap SA offer a tighter, more reliable seal around
What is Stamped Concrete? Features, Methods and Procedures of Stamping Concrete
Stamped concrete is a very intelligent and innovative innovation in concrete widely applied for floor in patios, car porch, driveways and sidewalks. Features, methods and procedure of stamping of c